- Home /
- Product information /
- UV-C products /
- AℓNUV products /
- [Disinfection for running water]
ULR1B/2B, 4B/6B, UV-C LED reactor
[Disinfection for running water]
ULR1B/2B, 4B/6B, UV-C LED reactor
▶Water flow rate:0.5~15L/min (Small flow)
▶Applications:Pure water system,
Industrial machinery,
Water purifier,
Water dispenser,
etc.
■Equipped with 265nm UV-C LEDs that have high disinfection capability
for viruses, bacteria, and chlorine-resistant pathogenic organisms (mercury free)
Learn more
■Achieves high disinfection performance with a water rectification
mechanism and light distribution technology
Learn more
■Vertical and horizontal installation is possible
■Can utilize high disinfection effect immediately upon startup
■Extensive product lineup for wide variety of applications
■Compatible with replacement of only the light source part
Applications
Water purifier, water dispenser, flow measurement in medical devices, etc.
Specifications
Part name | ULR1B | ULR2B | ULR4B | ULR6B |
---|---|---|---|---|
Max water flow (2.0m/s) [L/min] | 8.0 | 8.0 | ||
UV dose [mJ/㎠] ※1 |
10(@2.0L/min) 30(@0.6L/min) 40(@0.4L/min) |
10(@4.7L/min) 30(@1.2L/min) 40(@0.9L/min) |
10(@9.0L/min) 30(@2.6L/min) 40(@1.9L/min) |
10(@15.3L/min) 30(@4.0L/min) 40(@2.6L/min) |
Working pressure (Max.) [MPа] | 0.8 | 0.8 | ||
Water temperature [℃] | 0~40 | 0~40 | ||
Power consumption [W] ※2 | 3.6 | 7.1 | 14.1 | 21.1 |
Body material | SUS304 | SUS304 | ||
Empty weight [kg] | 0.25 | 0.36 | ||
Full water weight [kg] | 0.32 | 0.43 | ||
Fittings [inch] | 1/2 | 1/2 | ||
Size(LxWxH) [mm] | 146.5×40×66 | 187×55×73.5 | ||
IP rating | IP54 | IP54 | ||
Cooling method | Natural air cooling | Forced-air cooling |
※1 UV transmittance 98%, Typical value measured by biodosimeter using Bacteriophage Qβ (Initial Performance)
※2 ULR4B/6B are the value when operating the LED and fan
Outline dimensions (Unit:mm)
Related Products
ULR24A, UV-C LED resin reactor
A running water resin reactor that uses Stanley’s 265 nm UV-C LEDs
▶Water flow rate:0.5~6.0L/min (Small flow)
▶Applications:Water purifier,
water dispenser,
Medical measurement device,
etc.
ULR9C/S, 36C/S, 54C/S, UV-C LED system
A running water reactor that uses Stanley’s 265 nm UV-C LEDs
▶Water flow rate:10L/min~10㎥/h or more (Medium・Large flow)
▶Applications:Pure water system,
Industrial water equipment,
Small water plant equipment,
etc.
Precautions
-
Warning :
- ・Please do not bring it close to the fire. It may cause fire or malfunction.
- ・Please use water that meets tap water quality standards. If tap water or well water outside the water quality standard is used, harmful substances may not be removed.
- ・Please do not use the seawater. It may cause malfunction or wasting color.
- ・Please do not use hot water (more than 45 degree). It may cause malfunction or sterilization power may get lower.
- ・Please do not put it in the water. Water may permeate the electrical wiring, leakage may occur, and there is a possibility of electric shock.
- ・Please do not give too much shock to it. It may cause malfunction or get broken.
- ・Please do not put any chemicals or any liquids other than water. It will cause deterioration of the materials.
- ・UV light(265nm disinfection light) is emitted from the lamp when it is turned ON. Please do not look at UV light directly and expose directly your skin to it.
- ・Please do not disassemble it.If the power is turned on in the disassembled state, UV light will leak to the outside,adversely affecting the human body and peripheral members.
-
Notes :
- ・This product is a device to inactivate bacteria of water passing through the reactor by irradiating UV rays. (It will not work on items stuck to the piping route where the products are installed.)
- ・Since this product does not have filtration function, it is not possible to remove solid matter such as dust.
- ・In order to use this product effectively, please use it in the process after removing the solid component with a product with filtration function. Please do not connect it to water pipe directly.
- ・Please do not put the reactor in a cold place (colder than 5 degree). It may cause malfunction or get broken.
- ・Please use the reactor within the warranty period. If you don't, the sterilization power will get lower.
- ・Please discharge for more than 30 seconds before use. It is because there may be bacteria in the horse.
- ・It is impossible to remove radioactive materials by reactor.
- ・Glass is used for this product. Please be careful.
- ・Please use the rector with the flow rate and piping diameter described in the specifications.
-
When using the reactor in landscape orientation :
-
Please install it with water passage upward against the ground.
⇒It's the best way to obtain the max sterilization power. If installing it in a wrong way, the water will flow in a different way, which will cause less sterilization power.
-
Please install it with water passage upward against the ground.
-
When using the product in portrait orientation :
-
When installing this product vertically, please insert water from the lower water passage.
⇒It's the best way for getting max sterilization power. If you install it in other ways, sterilization power will get lower.
-
When installing this product vertically, please insert water from the lower water passage.
<Disclaimer>
・Stanley Electric CO., Ltd. shall not be liable for any disadvantages or damages resulting from the use of downloaded data or the impossibility of download and use, responsibility for the cause of lawsuit or any other damages or losses.
・This data shall be provided as is to users and Stanley Electric CO., Ltd. does not guarantee the absence of error or other defects in this data, conformance of this data to specific purpose, this data or its use will not infringe the right of users or third parties or any other matters.
・No part of this data may be reprinted or reproduced without prior written permission from Stanley Electric CO., Ltd. ・Stanley Electric CO., Ltd. reserves the right to make changes to data without notification.
disinfection systems UV-C products TOP