- Home /
- Product information /
- UV-C products /
- AℓNUV products /
- [Disinfection for running water]
US/50F274/R2, US/30F150/S4,
UV-CCL reactor
[Disinfection for running water]
US/50F274/R2, US/30F150/S4,
UV-CCL reactor
Applications
Water purifier, water dispenser, water heaters, flow measurement in medical devices
UV-CCL Reactor
Part Name | Lamp power [W] | Reactor dimensions | |
Diameter [mm] | Length [mm] | ||
US / 50F 274 /R2 | 4.8 | φ50 | 274 |
US / 30F 150 /S4 | 4.8 | φ30 | 150 |
Inverter
Inverters are also available for those who use our UV-CCL(L:240mm). Basically UV-CCL reactor and inverter are sold as a set.
Part Name | UVI/K0027A | Notes | ||
---|---|---|---|---|
Size (L×W×H) (mm) | 42.6×114.3×23 | *When OPEN abberrance or SHORT abberrance are happened, it sends an error signal. *It is able to control the turning on / off of the lamp by dedicated ON/OFF terminal, aside from input voltage terminal. |
||
Weight (g) | (55) | |||
Inverter electrical characteristics | Input voltage | Min | 21.6V | |
Typ | 24V | |||
Max | 26.4V | |||
Input current | Min | - | ||
Typ | 280mA | |||
Max | 380mA | |||
Open circuit voltage | Max | 1500V |
Precautions for water sterilization reactor
-
Warning :
- ・Please do not bring it close to the fire. It may cause fire or malfunction.
- ・Please use water that meets tap water quality standards. If tap water or well water outside the water quality standard is used, harmful substances may not be removed.
- ・Please do not use the seawater. It may cause malfunction or wasting color.
- ・Please do not use hot water (more than 45 degree). It may cause malfunction or sterilization power may get lower.
- ・Please do not put it in the water. Water may permeate the electrical wiring, leakage may occur, and there is a possibility of electric shock.
- ・Please do not give too much shock to it. It may cause malfunction or get broken.
- ・Please do not put any chemicals or any liquids other than water. It will cause deterioration of the materials.
- ・UV light(254nm disinfection light) is emitted from the lamp when it is turned ON. Please do not look at UV light directly and expose directly your skin to it.
- ・Mercury is used for this product. Please follow the rules of each local government for destruction method.(Rohs compliant)
- ・Please do not disassemble it with the light on or do not put the light on with the reactor disassembled.
-
Notes :
- ・This product is a device to inactivate bacteria of water passing through the reactor by irradiating UV rays. (It will not work on items stuck to the piping route where the products are installed.)
- ・Since this product does not have filtration function, it is not possible to remove solid matter such as dust.
- ・In order to use this product effectively, please use it in the process after removing the solid component with a product with filtration function. Please do not connect it to water pipe directly.
- ・We recommend it to put the reactor horizontally and water passage facing up. It is the most effective way to be installed.
- ・we recommend it to put the reactor connection so that it faces directly above the ground. It is the most effective way to be installed.
- ・Please do not put the reactor in a cold place (colder than 5 degree). It may cause malfunction or get broken.
- ・Please use the reactor within the warranty period. If you don't, the sterilization power will get lower.
- ・Please discharge for more than 30 seconds before use. It is because there may be bacteria in the horse.
- ・It is impossible to remove radioactive materials by reactor.
- ・Glass is used for this product. Please be careful.
- ・Please be careful with high voltage.
- ・Please use the rector with the flow rate and piping diameter described in the specifications.
-
When using the reactor in landscape orientation :
-
Please install it with water passage upward against the ground.
⇒It's the best way to obtain the max sterilization power. If installing it in a wrong way, the water will flow in a different way, which will cause less sterilization power. - You can put the lamp on by inputting DC24V to the inverter.
- We recommend that you wait at least 1 minute after the lamp is lit before using.
- Please install the inverter on the top of the reactor so that dew condensation water will not be transmitted.
-
Please install it with water passage upward against the ground.
-
When using the product in portrait orientation :
-
When installing this product vertically, please insert water from the lower water passage.
⇒It's the best way for getting max sterilization power. If you install it in other ways, sterilization power will get lower. - You can put the lamp on by inputting DC24V to the inverter.
- We recommend that you wait at least 1 minute after the lamp is lit before using.
- Please install the inverter on the top of the reactor so that dew condensation water will not be transmitted.
-
When installing this product vertically, please insert water from the lower water passage.
<Disclaimer>
・Stanley Electric CO., Ltd. shall not be liable for any disadvantages or damages resulting from the use of downloaded data or the impossibility of download and use, responsibility for the cause of lawsuit or any other damages or losses.
・This data shall be provided as is to users and Stanley Electric CO., Ltd. does not guarantee the absence of error or other defects in this data, conformance of this data to specific purpose, this data or its use will not infringe the right of users or third parties or any other matters.
・No part of this data may be reprinted or reproduced without prior written permission from Stanley Electric CO., Ltd. ・Stanley Electric CO., Ltd. reserves the right to make changes to data without notification.ccl_reactor
(UV-LED/UV-CCL)